Audio Technica AT-LP2X GY Fully Automatic Belt Drive Pikap

ÖZELLİKLERİ 

Product Features:

Fully-automatic belt-drive turntable

Two speeds: 33-1/3, 45 RPM

Balanced straight tone arm with hydraulically damped lift control and tone armrest

Built-in switchable PHONO/LINE pre-amplifier

Attached dual-RCA output cable

½" mount universal BLACK headshell

AT91R Dual Moving Magnet RED phono cartridge and long-life diamond stylus

Anti-resonance, die-cast aluminium platter with felt mat

Damped base construction for reduced low-frequency feedback coloration

Includes 45 RPM adapter and removable hinged smoked dust cover

Technical information

Type: Belt-drive turntable, fully automatic

Motor: DC servo-controlled

Drive method: Belt drive

Speeds: 33-1/3 RPM, 45 RPM

Turntable Platter: Die-cast aluminium

Wow and Flutter: < 0.2 % WRMS (33 RPM) at 3 kHz

Signal-to-Noise Ratio: > 60 dB

Output Level:

PHONO: 3.5 mV nominal at 1 kHz, 5 cm/sec

LINE: 220 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized

Power supply requirements: 220 to 240 V AC / 50/60 Hz

Dimensions: 435 mm × 353 mm × 128 mm (W×D×H)

Weight: 5.2kg

Cartridge & Stylus

Cartridge Model: AT91R

Cartridge Type: VM Dual Moving Magnet

Recommended load impedance: 47,000 ohms

Output voltage: 3.5 mV (mV at 1 kHz, 5 cm/sec)

Stylus: 0.6 mil bonded conical

Cantilever: Aluminum pipe

Tracking force range: 1.5 to 2.5 g (standard 2.0 g)

Cartridge weight: 5.0 g

Headshell

Model: AT-HS3 BK

Weight: 11.1 g

Overhang adjustment: 8 mm

Tonearm

Type: Static balanced straight shaped w/soft damping control

Effective length: 221.5 mm

Overhang: 19 mm

Maximum tracking error angle: Less than 3°

Stylus pressure adjustment range: 1 to 4 g

Applicable cartridge weight range (including headshell): 14.5 to 20 g

What's in the box?

AT-LP2x turntable

AT91R Dual Moving Magnet RED stereo cartridge with a replaceable stylus

1/2″ mount universal headshell

Power cord

45 RPM adapter

Removable hinged dust cover

4mm felt